Grande' Finale 2.0 Fast Dry Tumbler Coat

• Wait Less – within an hour, Grande Finale is dry to the touch. You can recoat in 2 hours. Grande Finale also hardens very quickly so you can ship tumblers out faster.
• Safe for You – Our water-based formula is epoxy free, low odor, and super low-VOC. You can breathe easy while using this product in your house and around your family and pets.
• Spreads Like Butter – Our non-dripping formula has higher viscosity but is still easy to spread. Grande Finale has excellent adhesion and bonding properties to all kinds of surfaces. It also self-levels to make your application process smooth like butter.
• Forever Clear – Your designs will shine clearly for generations to come with our non-yellowing formula. It’s almost clear even in its wet state and dries CrystaLac Clear when it's done.
• Your Toughest Coat – With superior water, chemical, and abrasion resistance, you can protect your designs from everyday life. Grande Finale is UV stable and forms a hard, super durable coat.

1. Environment: Apply at room temperature (68–75ºF)
2. Preparation: Grande Finale is a top coat. After you have prepped, applied a base coat, and decorated your tumbler, it’s time for Grande Finale.
3. Application: You can apply Grande Finale by hand or with a soft bristled brush. Apply evenly over the project, then you can let it self-level. If you are applying over glitter, use 400 grit (or higher) sandpaper to level-sand every 3 to 4 coats to take down the high spots and smooth it out. Clean up sanding dust by wiping your tumbler with CrystaLac Surface Conditioner and using a lint-free rag.
4. Re-coat Time: Your tumbler will be dry to the touch in about an hour, but wait 2 hours between coats. Use a minimum of 6 coats for best protection. Continue building your coats until it's completely smooth. Use as many coats as desired to build your gloss. Each layer will add depth and shine. A matte sheen can be accomplished by coating the last 2-3 layers with Grande’ Finale Matte.
5. Cure Time: Cups can be gently used after 5 days. Full hardness will develop over a period of 5-30 days, depending on how many coats were used, the products involved, as well as environmental conditions. Tumblers should be hand-washed and not left to soak in water.

For waterslides, tattoos, vinyl, etc. Some vinyls and glitters need to be sealed prior to topcoating. Always test before continuing. Build your coats of Grande’ Finale while sanding lightly over the vinyl as necessary to get it level.

• Store at room temperature in a dry place, out of direct sunlight.
• Do not subject the product to freezing or hot temperatures.
• Grande Finale has a shelf life of 5 years after opening.
• Completed tumblers should be hand-washed, hand dried, and not left to soak in water.

• Keep out of reach of children.
• If using a spray application method, wear proper eye and respiratory protection.

SDS Sheet