Flip'N Awesome 3 in 1 Paint, Primer & Built in Top Coat

• Safe for You – because your home shouldn’t become a laboratory. Our non-toxic formula lets you get messy without the stress. Safe for use in the house around the family and pets, with easy water cleanup.
• Forever Finished – our specialty formula blocks stains and tannins, leaving you with nothing short of that color you choose. Also contains UV stabilizers to protect colors from fading in sunlight.
• Easy to Apply – let your inner renaissance artist out with every brushstroke. With excellent coverage and self-leveling agents, you can wet it and let it do its thing. Flip’N Awesome can be brushed or sprayed.
• Ready for Everyday Life – you can apply to most surfaces. The built-in top coat is durable and water resistant, leaving you with a tough, smooth surface.

1. Environment: For best results, work in an environment between 68-75ºF.
2. Prep: It's important to start with a clean surface. Most paint failures happen if you skip this step. Old furniture can contain contaminants of all kinds. If you use a mineral spirit cleaner, be sure to remove any traces of it by using CrystaLac Surface Conditioner. Do not use tack cloths as they can cause adhesion problems. Scuff-sand lightly to give the surface some "tooth" to hang onto. Wipe off the sanding dust with CrystaLac Surface Conditioner.
3. Application: Shake or stir Flip'N Awesome well. Paint away using your favorite brush or sprayer. Use long, even strokes and apply thin coats. Allow product to self-level.
4. Recoat Time: Allow 2-4 hours of dry time between coats. For tannin-bleeding woods and light colors, 2-3 coats will be needed, and be sure to allow 24 hours dry time for the first coat.
5. Cure Time: Flip'N Awesome is intended for interior use and can be used lightly within 48 hours, but will take 2-4 weeks to fully cure. If your project will receive a lot of use/wear, we recommend applying an additional top coat like our Extreme Protection Polyurethane.
6. Exterior Use: While Flip'N Awesome's build-in top coat is durable and water resistant, you will want to protect your project with an exterior top coat like our Crab Coat Marine Finish.

• Store at room temperature in a dry place, out of direct sunlight.
• Do not subject the product to freezing or hot temperatures.
• CrystaLac products have a shelf life of 5 years after opening.
• Use in an environment above 68ºF.

• Keep out of reach of children.
• Do not allow children to use the product unsupervised.
• Do not ingest.
• If using a spray application method, wear proper eye and respiratory protection.

All of our products are water-based, low-VOC, making them non-toxic, environmentally friendly, and easy to use.

SDS Sheet